BUILT FOR / GENERAL CONTRACTORS

A contractor answering service that takes a message worth driving to

Long jobs, long sales cycles, and a phone that rings while you are on site.

The job you lose is usually the estimate nobody followed up.

A general contractor or remodeler sells slowly and works in public. A kitchen remodel or an addition can take weeks of conversations before anyone signs, and during those weeks you are on someone else's job, coordinating subs, meeting inspectors and buying material. The calls that come in while you are on site are the beginning of next quarter's work, and the estimates you sent last month are next quarter's revenue if somebody keeps them warm. I own a roofing company, so I know this one from my own side of it: the expensive mistake is rarely the work itself. It is the call nobody took and the estimate that went quiet because everyone was busy building.

Where a contractor's sale usually stalls.

  1. 01

    A homeowner calls about a bathroom remodel while you are walking a job with a sub. They get voicemail, call 2 other contractors, and book the first one who answers.

  2. 02

    You send an estimate on a Tuesday. Nobody follows up because nobody owns the follow up, and 3 weeks later the homeowner has signed with someone cheaper who simply called back.

  3. 03

    A past client wants a second project but cannot find your number, and the details from their first job live in a text thread on one person's phone.

What that turns into.

Every call answered

The line picks up when you cannot, takes the name, address, type of project and timeline, and texts you a summary you can act on from the truck.

One record per lead

Every inquiry becomes a record in a CRM with an owner and a next step, so a lead cannot sit in someone's head or a voicemail box.

Estimate follow up that stops when they reply

A short, polite sequence of check ins after an estimate goes out, written in your voice, that stops the moment the customer answers.

Why the trade matters here.

Contractors work under rules set by states, counties and cities, and the mix changes the moment a job crosses a city line: permits, inspections, HOA approvals and deed restrictions all run on somebody else's calendar. Weather sets the rest. Hurricanes, hail and hard freezes each send a wave of repair calls, and those waves land on top of the remodels already booked. A contractor working across a metro area is juggling several sets of requirements at once, which is why job details belong in one place rather than in a crew lead's phone.

How the line sorts the call.

Emergency

Active water damage, a storm opening up a wall or a roof, a client whose job site has a problem tonight. The line takes the address and what is happening and rings your phone. If anyone mentions a ceiling coming down or a gas smell, it tells them to leave and call 911 or the utility, and nothing more.

Routine

Remodel inquiries, additions, a small repair, a past client wanting a second project. The line asks the type of project, rough size, timeline and whether they own the property, and texts you a summary you can judge from the truck.

After hours

Most contractor calls are not urgent, so at night the line takes a full message and tells the caller when to expect a callback. Only the emergencies you choose ring through.

Not your job

Material reps, lead resellers, and jobs outside your trade. The line declines the sales calls and takes a polite message on the wrong trade calls in case you have someone to refer them to.

One call, written out.

An example written for this page, not a recording of a real customer. It shows the questions the line asks and the order it asks them in.

  1. Caller

    Hi, we are thinking about redoing our kitchen and wanted to get an estimate.

  2. Line

    Happy to help. What is the address of the property?

  3. Caller

    2205 Linden Avenue.

  4. Line

    Thanks. Do you own the home?

  5. Caller

    Yes.

  6. Line

    Is this a full remodel, with cabinets and layout changes, or more of a refresh like counters and fixtures?

  7. Caller

    Full remodel. We want to move the sink to an island.

  8. Line

    Got it. When are you hoping to start, and how did you hear about us?

  9. Caller

    Sometime in the spring. A neighbor recommended you.

  10. Line

    Thank you. I cannot give a price on the phone, but the owner will call you to set up a visit. Is this the best number?

  11. Your phone

    The text below arrives, and the lead is already a CRM record with a next step.

A contractor answering service has to take a useful message.

A traditional answering service gives you a name and a number. For a contractor that is barely better than a missed call, because you still have to call back just to find out whether the job is a leaking faucet or a full kitchen. A useful message tells you whether the job is worth driving to.

So the line asks the questions you would ask on the first call, in your words, and stops there. It does not promise a visit date, guess at a cost, or claim you do work you do not do. If the caller wants something outside your trade, it says so politely and takes the message anyway, in case you have someone to refer them to.

  • Name, callback number and the property address
  • Type of project and a rough sense of size
  • When they want it done and whether anything is urgent, like active water damage
  • Whether they own the property or are calling for someone else
  • How they heard about you, so you know which marketing is working

CRM for contractors, kept small enough to use.

Most contractor CRMs fail for the same reason: they ask a field crew to type things into a system after a 10 hour day. Nobody does, so the CRM becomes a list of old leads and the real information goes back into text threads.

The version that survives is small. Each lead gets one record, one owner and one next step. The record fills itself from the phone call or the web form, and the follow up runs on a schedule you approved. You open it to see who needs a callback today, not to do data entry. That is the same approach I use on my own roofing company, where the CRM was built around the life of a job rather than around a software company's idea of a sales pipeline.

Past clients are the cheapest next job.

A remodeling client who was happy is the most likely person to call you for the next project, and the most likely to refer a neighbor. Most contractors never contact them again because the job details live in old texts and paper files.

Once every job has a record, a simple check in after a season or two becomes possible: a note asking how the work is holding up, sent by you, to people who already know you. That is not a marketing blast. It is the call a good contractor would make anyway if the list were not buried.

What I would not do.

I would not automate anything that commits you to a price, a start date or a scope. I would not replace the estimating or project management software you already rely on, and I would not set up a follow up sequence that keeps messaging someone after they have said no. Accounts, phone numbers and data stay in your name, on your card, so you keep all of it if you ever move on.

Setting it up, from anywhere.

  1. 01

    Forward the number on your signs

    Your number stays on your trucks and yard signs. Your carrier forwards calls to the line all day, after hours, or when you do not pick up. I set it up with you remotely.

  2. 02

    Write the first call questions

    We write the questions you would ask on a first call, the trades you do and do not take, and what the line never says: a price, a start date, or a scope.

  3. 03

    Connect it to the CRM

    Each call becomes a record with an owner and a next step, in the CRM you already use or a simple one I set up. The estimate follow up wording is yours and you approve it.

  4. 04

    Test, then go live

    You call the test number as a homeowner with a remodel and as one with a leak. When the messages are worth driving to, your number points at it.

  5. 05

    Adjust after week 1

    We read the first calls and the CRM together, fix questions that confused callers, and adjust the follow up timing to how your clients actually decide.

What it costs.

$900 to $2,500

The answering setup is $900 to $2,500, and CRM with estimate follow up starts at $1,200. Phone running costs are typically under $30 a month at small volumes, on your own account and not marked up.

Published so you can decide whether to call, not as a quote. Every project is priced after a conversation about the actual work.

Services behind this work.

Questions general contractors and remodelers ask.

Do I need a CRM, or can this run on what I have?

If you already pay for a CRM or job management tool, I start there and build the follow up around it. If you are running on a spreadsheet and text messages, I will set up something simple that fits how you work. The point is one record per customer, not more software.

Will the answering service quote prices?

No. It captures what you need to quote: the address, the type of project, rough size, timeline and how they found you. Pricing a remodel over the phone is how contractors lose money, so it stays with you.

How does estimate follow up work without being pushy?

A few short messages spaced out over a couple of weeks, written in your words, asking whether they have questions. It stops the moment they reply, whether the answer is yes, no, or not yet. You approve the wording before anything goes out.

Can it handle calls in Spanish?

Yes, if you want it to. Plenty of Houston callers prefer Spanish, and the line can answer in either language and send you the details in English.

What does it cost?

The phone answering setup starts at $900, and CRM and lead follow up work starts at $1,200. Phone running costs are typically under $30 a month at small volumes, billed to your own account rather than marked up.

Do you set this up for contractors outside Houston?

Yes. I am based in Houston and set this up remotely for contractors anywhere in the US. The number can carry your own area code, and the script describes your service area, not mine. In person visits only happen around Houston.

What happens to storm damage calls?

They get their own question: is water coming in right now. Active damage rings your phone straight away with the address. Everything else from the storm is taken in order and lands in the CRM as a callback list, so nobody is forgotten when the phone gets busy.

Where this works

Based in Houston. Set up anywhere in the US.

Houston is home, and I meet Houston clients in person. Everywhere else the whole build happens remotely: your calls forward from the number you already have, the script is written with you on a call, and you test it from your own phone before it answers a single customer.